Audio Monster 10m Mobiles - Galaxy - 95T

The 95T has been updated and is now called the 95T2.
We kinda laughed at one of the other websites on the net that says when this radio is properly tuned it will easily do 200 watts. There is some semi-truth to that but let me go on.

The 95T2 is basically the same radio as the 95T was. Changes include a better designed heat sink for more cooling. They also changed the internal fan just a little. 2 changes that you'd never notice as the end user. Also they took away the variable talkback, and replaced it with a variable RF gain (receive gain). A needed feature for most users. Galaxy really does their best making radios that customers are pleased with. This radio is still 361 chns, AM/FM/USB/LSB, roger beep, variable power and more. It has a 6 digit freq counter, 10kz (jumps in between channels), and built in SWR meter. The radios variable talkback was removed and replaced with low/med/high talkback that can be turned on and off. This radio also boasts the large built in meter. Getting back to the funny "200 watt" story. Be very cautious with these types of claims. The average 95T2 coming from most dealers with their best tune up, they do about 165 watts max no matter what claim they make.

The new 95T2 can easily do 185 watts after a redesign on the radio (see What is a Superwackpack on the FAQ) 200 watts is a little off base for the 95T2. Ours do about 180-190 watts depending on voltage, on a Bird 4314 meter. Others may say that they too use Bird meters but after 20 years of building radios you can take what we just said or leave it. You can see 200+ watts on a meter, at high voltages, high swrs, or crappy meters..........but facts are we use high end bench equipment. The heat sinks on these radios are only rated at 150 watts. We can safely get 185 watts out of the radio because of our redesign, which keeps it much cooler, and much more efficient then a "tuned/peaked, or whatever else they call it" tune up. So a poorly worked radio doing 200 watts or more, will easily damage the amplifier section on the radio........so BEWARE!

Getting out of the radio watt politics for a moment, the 95T2 is a well designed, high power, full featured radio. Worth every penny, with some really high end technical work done to it! But beware of crazy claims! Radios covered under a 2 year factory warranty, call us for details!

Galaxy 95T Features:

• A High-Performance output circuit that uses two Toshiba 2SC2290 power transistors to generate 50 watts for AM/FM and 150 watts for SSB operation

• Chassis incorporates a solid aluminum finned rear section as a heatsink

• Additional heat sink on the bottom of the radio with an internal Micro cooling fan increases the radio height from 2.5 to 3 inches

• Same main circuit board as our DX 2517, DX 93T, DX 48T and DX 45MP

• "StarLite" faceplate is matte black with all lettering backlit in green and blue

• Switchable sixth digit provides five or six digit frequency display

• Our exclusive "SuperSlider" circuit maximizes frequency control by switching the Fine clarifier between Receive/Transmit and Receive Only operation or completely out of the circuit with one slide switch. The Coarse clarifier operates on both receive and transmit unless the SuperSlider switch is off. When switched off, both clarifiers are out of the circuit.

• Retro-look red modulation lamp (with On/Off switch) flickers like the old neon lamps of the Fifties and Sixties

• Front mic jack

• Variable power output control

• Red channel and frequency digits

• Heavy duty DC power cord

• Large, easy-to-read meter with 4 scales:

  1. "S" meter indicates up to 60dB over S9

  2. Modulation percentage scale for use on AM

  3. Calibrated power scale

  4. SWR scale

• Automatic SWR circuit (No complicated calibration procedure required)

• LED's light red to warn of high SWR

• Echo with dual controls

• Talkback circuit with On/Off switch and volume control

• Meter glows red during transmit

• NB/ANL circuit with green LED indicator

• Two year limited warranty

Unusual Features:

• The echo has internal controls only. It is our famous dual control echo circuit without any controls on the front panel. The On/Off switch is there, but to adjust the echo sound, the bottom cover must be removed. Locate the rectangular metal box containing the echo board. Do not open this box. Use a small plastic tuning tool to gently adjust the trimmer pots inside the holes marked "ECHO" and "TIME." These pots are somewhat fragile so it is best not to use a metal screwdriver.

• A single slide switch controls both the Echo and the Roger Beep. They can both be off, but they cannot both be on at the same time.

• There is no receive gain pot. A 40dB attenuator switch takes its place.